Record/Monitor Out Ports
3G-SDI (HD-SDI) Out
The following expanders feature an HD-SDI connector:
- DSMC2 Base Expander
- DSMC2 V-Lock I/O Expander
- DSMC2 REDVOLT Expander (labeled as “SDI-1” and “SDI-2”)
- DSMC2 Jetpack-SDI Expander (labeled as “SDI”)
A standard 75 ohm BNC connector provides the following output:
- Legal range of HD-SDI signals
- Broadcast specification 3G-SDI (HD-SDI) video output (default mode is Clean)
- Two (2) channels of embedded audio
- Time of Day and Edge timecode
- Record Tally flag
- Clip name information (as SMPTE RP-188 VITC2 HANC metadata)
The 3G-SDI (HD-SDI) output provides the formats described in the table below:
|
3G-SDI (HD-SDI) Output Formats1 |
||
|
Video Feed2 |
Frequency (Hz)3 |
SMPTE Standard |
|
720p |
23.98, 24.00, 25.00, 29.97, 30.00, 50.00, 59.94 |
SMPTE ST 292-1 (1.485 Gbps) |
|
1080p 10-bit 4:2:2 |
23.98, 24.00, 25.00, 29.97, 30.00 |
SMPTE ST 292 (1.485 Gbps) |
|
1080p 10-bit 4:2:2 |
50.00, 59.94, 60.00 |
3G-SDI SMPTE ST 424 (2.970 Gbps) SMPTE ST 425 (2.970 Gbps) |
- Ensure that you select a frequency supported by your monitor.
- The output is progressive scan (p); it does not support progressive segmented frame (PsF) or interlaced (i) scan formats.
- The frequency options depend on project time base. If you have a non-drop frame project time base (such as 24.00), you can select only non-drop frame frequencies. If you have a drop frame project time base (such as 23.98), you can select only drop frame frequencies.
|
75 ohm BNC Connector |
|||
|
pin |
signal |
Description |
Direction |
|
Center |
3G-SDI |
SMPTE ST 424 |
Out |
|
Shield/Screen |
GROUND |
Camera ground |
N/A |
Compatible Cable
- 790-0341: RED® HD-SDI Cable (6')
HDMI Out
The following expanders feature an HDMI 1.2 (Type A) connector:
- DSMC2 Base Expander
- DSMC2 V-Lock I/O Expander
- DSMC2 Jetpack Expander
- DSMC2 REDVOLT Expander
NOTE: For more information about HDMI wireless transmitter support, go to HDMI Wireless Transmitters.
A standard HDMI connector provides the following output:
- High-definition video output (default mode is Overlay)
- Two (2) channels of embedded audio
The HDMI output provides the formats described in the table below:
|
HDMI Output Formats1 |
|
|
Video Feed2 |
Frequency (Hz) |
|
480p |
50.00, 60.00 |
|
720p |
24.00, 25.00, 30.00, 50.00, 60.00 |
|
1080p |
24.00, 25.00, 30.00, 50.00, 60.00 |
- Ensure that you select a frequency supported by your monitor.
- The HDMI output is progressive scan (p); it does not support progressive segmented frame (PsF) or interlaced (i) scan formats.
Compatible Cable
- 790-0331: RED HDMI Cable (5')
HDMI Wireless Transmitters
The HDMI connector supports HDMI wireless transmitters, so that you can transmit the HDMI signal to a remote HDMI monitor. The HDMI connector supports industry-standard HDMI wireless transmitters.
NOTE: The DSMC2 Jetpack Expander features a spring-loaded retainer that keeps a mounted HDMI wireless transmitter firmly in place. A wireless transmitter that is longer than 9.8 cm (including the HDMI connector) might not fit in the retainer.
NOTE: The DSMC2 V-Lock I/O Expander, DSMC2 Jetpack Expander, and DSMC2 REDVOLT Expander have a USB power out connector that provides 5 V at 1.5A, which powers most industry-standard HDMI wireless transmitters. For more information, go to USB Power.