No HDMI or MON-1 Signal

Symptom

The HDMI or MON-1 port on the expander or module does not output a signal.

Explanation

The secondary LCD/EVF port (on the side of the camera) and the HDMI/MON-1 port cannot be used at the same time. For more information, go to Monitor Preferences.

Potential Resolutions
  • If an LCD or EVF is connected to the secondary LCD/EVF port (on the side of the camera), remove the LCD or EVF.
  • Ensure that HDMI/HD-SDI monitoring/recording is set up correctly. For more information, go to Record.
DSMC2 MONSTRO Operation Guide
955-0170_V7.1, REV-N
Copyright © 2019 RED.COM, LLC. All rights reserved.