You are here:

RED TETHER Capture Frame Rates

This section includes:

The table describes the maximum available capture frame rate given a REDCODE^® compression ratio and format for RED TETHER. These numbers are based on a 500 Mb network performance. The capture frame rate may be higher or lower depending on the actual network speed.

NOTE: The values in this table are specific to firmware v6.0.

Capture Frame Rates (FPS)

Format	REDCODE
	22:1	18:1	15:1	12:1	11:1	10:1	9:1	8:1	7:1	6:1	5:1	4:1	3:1	2:1
6K	42	34	28	23	21	19	17	15	13	11	9	7	5	3
6K 3:2	54	44	37	29	27	24	22	19	17	14	12	9	7	4
6K 6:5	60	56	46	37	34	31	28	25	21	18	15	12	9	6
5K	59	48	40	32	29	27	24	21	18	16	13	10	8	5
5K 6:5	60	60	60	51	47	42	38	34	29	25	21	17	12	8
4K	60	60	60	50	45	41	37	33	29	25	20	16	12	8
4K 2:1	60	60	60	52	48	43	39	35	30	26	21	17	13	8
4K 2.4:1	60	60	60	60	57	52	46	41	36	31	26	20	15	10
4K 16:9	60	60	60	53	48	44	39	35	31	26	22	17	13	8
4K 6:5	60	60	60	60	60	60	58	52	45	39	32	26	19	13
3K	60	60	60	60	60	60	60	58	51	44	36	29	22	14
3K 2:1	60	60	60	60	60	60	60	60	54	46	38	31	23	15
3K 2.4:1	60	60	60	60	60	60	60	60	64	55	45	36	27	18
3K 16:9	60	60	60	60	60	60	60	60	55	47	39	31	23	15
3K 6:5	60	60	60	60	60	60	60	60	60	60	57	46	34	23
2K	60	60	60	60	60	60	60	60	60	60	60	60	49	32
2K 2:1	60	60	60	60	60	60	60	60	60	60	60	60	52	34
2K 2.4:1	60	60	60	60	60	60	60	60	60	60	60	60	60	41
2K 16:9	60	60	60	60	60	60	60	60	60	60	60	60	60	35
2K 6:5	60	60	60	60	60	60	60	60	60	60	60	60	60	51