IPP2 LUT Creator

To create an IPP2 LUT, follow the instructions below:

Go to File > IPP2 LUT Creator.

For Output Transform, set the following:

• Color Space: Set one of the following:
  • ACES AP0
  • Adobe 1998
  • DCI-P3
  • DCI-P3 D65
  • ProPhoto
  • REC 790
  • REC 2020
  • REDWideGamutRGB
  • XYZ
• Gamma Curve: Set one of the following:
  • BT1886
  • Gamma 2.2
  • Gamma 2.6
  • HDR-2084
  • Hybrid Log-Gamma
  • Linear
  • LOG3G10
  • REDlogFilm
• Set the HDR Peak Nits from 100-10000.

  NOTE: HDR Peak Nits is only available when Gamma Curve: HDR-2084 is selected.

• Output Tone Map: Set to one of the following:
  • Low Contrast
  • Medium Contrast
  • High Contrast
  • None
• Highlight Roll-off: Set to one of the following:
  • Very Soft
  • Soft
  • Medium
  • Hard
  • None

    NOTE: None is only available with Advance controls enabled. To enable Advanced controls go to Preferences > General and select the Show Advanced Controls check box.

3. For LUT Settings, set the following:
   • Cube Size: Set to one of the following:
     • 17
     • 26
     • 32
     • 33
     • 64
     • 65
   • Select a location for the file to be stored.
4. Click OK.

   A save successful window opens.