Turn On the Camera

NOTE: If you have just turned off the camera, wait at least three (3) seconds before turning the camera back on.

1. Attach a power source to the camera.

   The Power Status LED illuminates red, indicating that an appropriate power source is connected.

2. Press and release the PWR/REC key on the right side of the camera.

   The Power Status LED turns off, and within five (5) seconds illuminates yellow as the camera turns on.

   The Power Status LED then illuminates green to confirm that the camera is turned on and ready to use.

NOTE: The Power Status LED flashes red when there is less than five (5) minutes of operating time remaining.