RED Start/Stop Cable (1B to Sync, Ctrl, BNC)
The RED Start/Stop Cable (1B-to-Sync/Ctrl/BNC) provides start/stop and tally support through the RED W.M.D. The 14-pin 1B LEMO connects to the EXP port on the W.M.D, and transfers the tally signal from the camera to the W.M.D. The 4-pin LEMO connects to the CTRL port on the camera. The BNC connector connects to the SYNC port on the camera via a 3BNC-to-00 LEMO Sync Cable and a BNC-to-BNC Adaptor, and transfers the start/stop signal to the camera. RED offers the following cable:
-
790-0415: RED Start/Stop Cable (1B to Sync, CTRL, BNC)
NOTE: Full support for start/stop requires the 3BNC-to-00 LEMO Sync Cable and a BNC-to-BNC Adaptor (both are included with the RED 3-Axis Lens Control System). The 3BNC-to-00 LEMO Sync Cable has two (2) additional BNC connectors that offer support for timecode and genlock.
NOTE: When using the RED Start/Stop Cable (1B to Sync, CTRL, BNC), you must configure the W.M.D. for DSMC start/stop operation only. On the W.M.D., go to Select > Start/Stop > DSMC.
Figure: RED Start/Stop Cable (1B to Sync, Ctrl, BNC)
|
RED start/stop cable (1B to sync, ctrl, bnc) |
||
|---|---|---|
|
# |
Connector |
Part Number |
|
1 |
J1 |
LEMO FGG.1B.314.CLAD42Z |
|
2 |
J2 |
Amphenol® 31-710013 |
|
3 |
J3 |
LEMO FGG.00.304.CLAD30Z |
RED Start/Stop Cable (1B to Sync, Ctrl, BNC) Pinout
Figure: Front Face View J1 (Left) and J3 (Right)
|
RED start/stop cable (1B to sync, ctrl, bnc) |
||||
|---|---|---|---|---|
|
J1 |
J2 |
j3 |
Signal |
Wire Color |
|
J1-1 |
J2-1 |
J3-1 |
GND |
Yellow |
|
J1-2 |
- |
J3-4 |
232_Rx |
White |
|
J1-3 |
- |
- |
+12 VDC |
- |
|
J1-4 |
- |
J3-2 |
232_Tx |
Green |
|
J1-5 |
- |
- |
Momentary Start/Stop |
- |
|
J1-6 |
- |
J3-3 |
DSMC Tally |
Blue |
|
J1-7 |
J2-2 |
- |
DSMC Start/Stop |
Red |
|
J1-8 |
- |
- |
AUX GPIO 1_3.3 |
- |
|
J1-9 |
- |
- |
+3.3 VDC |
- |
|
J1-10 |
- |
- |
Cable ID |
- |
|
J1-11 |
- |
- |
- |
- |
|
J1-12 |
- |
- |
AUX GPIO 2_3.3 |
- |
|
J1-13 |
- |
- |
- |
- |
|
J1-14 |
- |
- |
- |
- |
|
J1-SHELL |
- |
J3-SHELL |
GND (SHIELD) |
Braid Shield |