Keys

Map keys to often-used actions to easily control the camera. For a full list of the default key mappings, go to Default Key Functions.

NOTE: If using a third-party module, the default GPI functions may match the inputs offered by the module (instead of the RED defaults).

Key Mapping

To map or remap a user key:

1. Press the user key that you want to map.
2. Select an action from the Press (or CCW) drop-down menu that you want to map to the user key.
3. To un-map a key, select -Key Disabled- from the drop-down menu.
4. If you want, map a Release or (CW) action to the key.

   A Release action occurs when a pressed key is released.

Options

• Lock Side Module keys : None of the module keys perform any actions when pressed, unless you set up the exceptions below:
  • Record key remains active when locked
  • Navigation keys remain active when locked
• Show key action notifications: A notification displays on the bottom of the display when you perform an action mapped to a key.

Soft Keys

The following sets of soft keys are available on the touchscreen:

• A, B, C, D: Left side of the touchscreen
• 1, 2, 3, 4: Right side of the touchscreen

To map or remap a soft key, select an action from the drop-down menu next to the key you want to map.

• Enable Soft Keys on touchscreen: Tap the left or right side of the touchscreen to show the soft keys.
• Show key actions as labels: When the soft keys display, the number/letter of the key and the key action display.

Advanced

Use the Advanced tab to map any key, even if the key is not currently accessible. For example, you can map the REDMOTE keys even if a REDMOTE is not present.

WARNING: It is possible to remap the navigation keys using this tab. However, if you do not have a touchscreen attached, it is possible to lock out control. Be careful when remapping navigation keys.