Power Ports
DC IN (Power Input)
The 6-Pin 1B DC-IN connector accepts DC input power from 11.5 V DC to 17 V DC. A built-in power conditioner protects against reverse-polarity connections, electrostatic discharge (ESD), undervoltage, overvoltage, and overcurrent.
WARNING: Both pairs of +VBATT and GROUND pins must be wired. Using a third-party power cable that wires only one (1) pair of +VBATT and GROUND pins may damage the power supply or the camera. Damage to the power supply or other components of the camera system caused by using an inappropriate power cable is not covered under warranty.
Figure: Front Face of the DC In Power Input Connector (Looking at the Camera)
|
6-Pin 1B DC Input Connector |
||
|
pin |
signal |
description |
|
1 |
+VBATT |
Power input, +11.5 to +17 V DC |
|
2 |
+VBATT |
Power input, +11.5 to +17 V DC |
|
3 |
SCL-BATT |
Serial battery bus clock |
|
4 |
GROUND |
Power return (camera ground) |
|
5 |
GROUND |
Power return (camera ground) |
|
6 |
SDA-BATT |
Serial battery bus data |
NOTE: Mating connector is FGJ.1B.306.CWLD72Z.
Compatible Cables
- 790-0138: RED 2B-to-1B Power Adaptor Cable
- 790-0164, 790-0646: XLR Power Cable (10')
- 790-0165, 790-0647: XLR Power Cable (30")