Power Ports
DC IN (Power Input)
The following expanders feature a DC IN connector:
- DSMC2 Base Expander
- DSMC2 V-Lock I/O Expander
- DSMC2 Jetpack Expander
- DSMC2 Jetpack-SDI Expander
- DSMC2 REDVOLT Expander
The 6-pin 1B LEMO connector accepts DC input power from 11.5 V DC to 17 V DC. A built-in power conditioner protects against reverse-polarity connections, electrostatic discharge (ESD), undervoltage, overvoltage, and overcurrent.
WARNING: Both pairs of +VBATT and GROUND pins must be wired. Using a third-party power cable that wires only one (1) pair of +VBATT and GROUND pins may damage the power supply or the camera. Damage to the power supply or other components of the camera system caused by using an inappropriate power cable is not covered under warranty.
Figure: Front Face of the DC In Power Input Connector (Looking at the Camera)
|
6-Pin 1B DC Input Connector |
||
|
pin |
signal |
description |
|
1 |
+VBATT |
Power input, +11.5 to +17 V DC |
|
2 |
+VBATT |
Power input, +11.5 to +17 V DC |
|
3 |
SCL-BATT |
Serial battery bus clock |
|
4 |
GROUND |
Power return (camera ground) |
|
5 |
GROUND |
Power return (camera ground) |
|
6 |
SDA-BATT |
Serial battery bus data |
NOTE: Mating connector is FGJ.1B.306.CWLD72Z.
Compatible Cables
- 790-0138: RED 2B-to-1B LEMO Power Adaptor Cable
- 790-0164: XLR Power Cable (10')
- 790-0165: XLR Power Cable (30")
AUX Power 2-Pin LEMO, 3.0A
The DSMC2 REDVOLT Expander features an auxiliary power out connector (3.0A).
The 2-pin 0B LEMO connector (LEMO EEG.0B.302.CLL) supplies unregulated (+) 11.5 to 17 VDC battery pass-through power. The maximum sustained current draw is 3.0A.
Figure: Front Face of Connector (Looking at the Camera)
|
LEMO EEG.0B.302.CLL Connector |
|||
|
PIN |
SIGNAL |
Description |
Direction |
|
1 |
GROUND |
Common ground |
N/A |
|
2 |
+11.5 to +17 VDC |
+11.5 to 17 VDC unregulated battery pass-through power |
Out |
NOTE: Mating connector is FGG.0B.302.CLAD.
Compatible Cable
- 790-0410: RED W.M.D. Power Cable 2-Pin 1B to 2-Pin 0B (18")
AUX Power 2-Pin LEMO, 1.5A
The DSMC2 Jetpack-SDI Expander features an auxiliary power out connector (1.5A).
The 2-pin 0B LEMO connector (LEMO EEG.0B.302.CLL) supplies unregulated (+) 11.5 to 17 VDC battery pass-through power. The maximum sustained current draw is 1.5A.
Figure: Front Face of AUX PWR Connector (Looking at the Camera)
|
LEMO EEG.0B.302.CLL Connector |
|||
|
PIN |
SIGNAL |
Description |
Direction |
|
1 |
GROUND |
Common ground |
N/A |
|
2 |
+11.5 to +17 VDC |
+11.5 to 17 VDC unregulated battery pass-through power |
Out |
NOTE: Mating connector is FGG.0B.302.CLAD.
Compatible Cable
- 790-0410: RED W.M.D. Power Cable 2-Pin 1B to 2-Pin 0B (18")
AUX Power (4-Pin LEMO)
The DSMC2 REDVOLT Expander features an auxiliary power out connector.
The LEMO EAG.0B.304.CLN connector supplies unregulated (+) 11.5 to 17 VDC battery pass-through power. The maximum sustained current draw is 1.5A.
Figure: Front Face of AUX PWR Connector (Looking at the Camera)
|
LEMO EAG.0B.304.CLN connector |
|||
|
Pin |
Signal |
Description |
Direction |
|
1 |
GROUND |
Camera Ground |
N/A |
|
2 |
GPI |
General purpose input trigger (GPI), use for trigger in |
In |
|
3 |
GPO |
General purpose output trigger (GPO), use for tally out |
Out |
|
4 |
+11.5 to +17 VDC |
+11.5 to 17 VDC unregulated battery pass-through power |
Out |
NOTE: Mating connector is FGG.0B.304.CLAD.
Compatible Cable
- 790-0552: RED 4-Pin 0B LEMO-to-Flying Lead AUX Power Cable (6')
USB Power
The following expanders feature a USB 2.0 (Type A) power out connector:
- DSMC2 Jetpack Expander
- DSMC2 V-Lock I/O Expander
- DSMC2 REDVOLT Expander
The USB power out connector supplies 5 V of power. The maximum sustained current draw is 1.5A.
You can use the USB power out connector to provide power to an attached HDMI wireless transmitter.
NOTE: The USB connector only offers power out, and does NOT support USB communication.
AUX Power (P-Tap)
The DSMC2 V-Lock I/O Expander features an AUX power out connector. The AUX power out connector features an industry-standard P-Tap connector and supplies conditioned VBATT at a maximum of 3.0A of power.
Figure: P-Tap Connector (Looking at Camera)
|
2-pin P-TAP Connector |
|||
|
PIN |
SIGNAL |
Description |
Direction |
|
1 |
GROUND |
Common ground |
N/A |
|
2 |
+11.5 to +17 VDC |
+11.5 to 17 VDC unregulated battery pass-through power |
Out |