False Color Modes: Peaking

To enable, go to Menu > Overlays > Tools > False Color and select Peaking from the False Color drop-down menu.

The Focus Peaking tool displays a red overlay on top of in-focus edges. Select a Peaking Level of 1 to 10 (weak to strong). The RGB settings affect the indicators.

The Focus Peaking indicators are applied after the image is scaled to a monitor, so the indicators may look different on different monitors.

When enabled, the ā€œPāˆšā€ indicator displays in the Lower Status Row.

DSMC2 HELIUM Operation Guide
955-0171_V7.1, REV-N
Copyright Ā© 2019 RED.COM, LLC. All rights reserved.