Turn On the Camera

NOTE: If you have just turned off the camera, wait at least three (3) seconds before turning the camera back on.

1. Attach a power source to the camera.

   The Power Status LED illuminates red, indicating that an appropriate power source is connected.

2. Press and release the PWR/REC key on the right side of the camera.

   The Power Status LED illuminates amber as the camera turns on.

   The Power Status LED illuminates green to confirm that the camera is turned on and ready to use.

Turn Off the Camera

Use one of the following methods to turn off the camera:

• Go to Menu > Power and select Shutdown.
• Press and hold PWR/REC until the Shutting Down... notification shows on the display.

NOTE: The camera turns off automatically if the supply voltage drops to 11.5 V.