GPIO Sync

Sync

Use the Sync menu to set up genlock. For more information, go to Timecode, Genlock, Multi-Camera Setup.

Sensor Sync Mode

Sensor Sync Mode allows the shutter timing (scan start) to sync to an external signal.

  • Off: Sensor runs at the current recording frame rate. This is the default option.
  • Genlock: Sensor synchronizes with the incoming compatible genlock signal.

Sync Menu

Figure: Sync Menu

BRAIN GPIO
  • GPO Function (Camera Output): Select an option to configure the output for devices connected to the CTRL connector on the camera:
    • Sync Out: Provides an output sync signal to act as a shutter start tally.
    • Recording Indicator Out: Provides a signal when recording is in process.

BRAIN GPIO Menu

Figure: BRAIN GPIO Menu

GEN and SYNC Status Indicators

The Lower Status Row of the camera display has GEN and SYNC indicators, which change color based on the current genlock and sync statuses. For more information, go to Project Status Indicators.

RED RANGER Operation Guide
955-0185_V7.2, REV-J
Copyright © 2019 RED.COM, LLC. All rights reserved.