Camera and Lens Status

To set up what camera and lens info displays as part of the overlay, go to Menu > Overlays > Status.

Camera Status Overlays

Exposure
  • Shutter Speed: Displays the exposure time in seconds (1/xx sec). When you change the frame rate in this mode, the shutter speed stays the same, but the shutter angle changes.
  • Shutter Angle: Displays the exposure as an angle (1° to 360°). When you change the frame rate in this mode, the shutter angle stays the same, but the shutter speed changes. (Default)
Power
  • Current Batt %: Displays the remaining percentage of active battery. (Default)
  • Total Time: Displays the total run-time left of battery power, taking into account all available batteries.
  • Voltage: Displays the voltage.
VU Meter
  • Input: Displays levels of audio inputs (pre-mixer). (Default)
  • Output: Displays levels of audio outputs (post-mixer).
Histogram
  • RGB: Displays red, green, and blue channels on histogram. (Default)
  • Luma: Displays luma channel on histogram.
Media
  • Percentage: Displays media space remaining as a percentage.
  • Time Remaining: Displays media space remaining as time in hours and minutes (HHH:MM). (Default)

Lens Status Overlays

Aperture Increments
  • 1/4 Stop: Aperture increments in 1/4 stops.
  • 1/3 Stop: Aperture increments in 1/3 stops. (Default)
Focus Distance
  • Metric: Displays lens focus distances in meters.
  • Imperial: Displays lens focus distances in feet and inches. (Default)