Top LCD / EVF SDI
The Top LCD / EVF SDI menu provides access to the top LCD features and the EVF SDI settings.
The Top LCD / EVF SDI settings you can configure include:
|
Item |
Details |
|---|---|
|
Select the monitor resolution |
|
|
Select the frequency for the EVF SDI port |
|
|
Set the look of the Top LCD and EVF to RWG/Log3G10, Image/LUT, or Custom Display |
|
|
Configure the look of the Top LCD and EVF monitor independently of other monitor pipelines |
|
|
Enable or disable the Top LCD and EVF guides |
|
|
Enable or disable the Top LCD and EVF tools |
|
|
Magnify the Top LCD and EVF image |
|
|
Select the position of the original image to magnify |
|
|
Flip and mirror the Top LCD and EVF display |
|
|
EVF SDI Overlay |
Enable or disable the EVF SDI overlay |
|
Select the EVF SDI overlay type |
|
|
Select the opacity of the EVF SDI overlay |
Resolution
|
|
You can select the resolution of the Top LCD. The selections include: • Auto (default) • 1080p • 2K DCI |
Frequency
|
|
You can select the frequency of the image sent to the EVF SDI port. The selections include: • 23.98 • 29.97 • 59.94 (default) |
Look
|
|
You can select the look of the image preview signal sent to the Top LCD. The selections include: • Image / LUT (default) • REDWideGamutRGB / Log3G10 • Custom Display (enables the Custom Display menu) |
Custom Display
|
|
Use Custom Display to configure the Top LCD / EVF SDI independently of the camera's Image / LUT settings or other monitor output configurations. Refer to Image / LUT Menu for more information about how to use the Image/LUT settings and menus. |
Guides
Use Guides to enable or disable the viewing of guides. Press SEL to toggle between enabled (default) and disabled.
Tools
Use Tools to enable or disable the viewing of tools. Press SEL to toggle between enabled (default) and disabled.
Magnify
Use Magnify to enable or disable monitor magnification. Press SEL to toggle between enabled and disabled (default).
Magnify Position
|
|
Use Magnify Position to globally select the area of the image you want to magnify. The selections include:
|
Flip / Mirror
Use Flip / Mirror to enable or disable the flipped mirrored orientation of the Top LCD. Press SEL to toggle between enabled and disabled (default).
EVF SDI Overlay Mode
|
|
Use Overlay Mode to select one of the following SDI port overlay modes: • Simple - minimal image information is displayed • Basic - Simple plus time sensitive media and battery information • Standard - industry standard image and camera details are displayed • Advanced - Standard plus exposure and audio meters • Technical - Advanced plus lens focus distance and monitor look status |
NOTE: The camera will not display this overlay on the Top LCD. However, the Top LCD will scale down the image preview slightly when the EVF SDI Overlay is enabled.
EVF SDI Overlay Opacity
|
|
Use EVF SDI Overlay Opacity to select the percentage of opacity you want the EVF SDI overlay to use between 100% and 0%. |
