Timecode Port
The female LEMO 5-Pin 0B connector supports SMPTE timecode input and output. Pins 2 and 3 can be used together to receive a balanced SMPTE 12M serial timecode input. Pin 2 can be used by itself (leave pin 3 open) to receive a single-ended SMPTE 12M serial timecode input. Pin 5 is a timecode output.
Figure: Front face of Timecode 0B Connector (looking at the back of the camera).
LEMO 5-Pin 0B Timecode Connector
|
pin |
signal |
description |
Direction |
|---|---|---|---|
|
1 |
GROUND |
Camera ground |
NA |
|
2 |
Timecode In |
Timecode input - SMPTE single ended |
In |
|
3 |
NA |
No connection |
NA |
|
4 |
+5 V Out |
+5 V out, 200 mA max |
Out |
|
5 |
Timecode Out |
SMPTE 12 M Timecode output |
Out |
NOTE: Mating connector is LEMO FHG.0B.305.CLAD.