Serial
Use Serial to configure the serial connection to the Extension Port.
The settings you can configure for the serial connection through the Extension Port include:
|
Items |
|
Details |
|---|---|---|
|
|
Select the serial protocol |
|
|
|
Select the serial port baud rate |
|
|
|
Enter the IP address for the serial connection |
Protocol
Use Protocol to select how the camera communicates through the serial connection.
The Protocol settings you can select include:
- Network (PPP) - Supports RCP2 commands and full IP functionality over a point-to-point network connection (default).
- Serial RCP2 - Supports exclusively RCP2 commands over a serial connection.
Most accessories are configured for Network protocol, you only need to use Serial RCP2 when it is required by a specific accessory connected to the Extension Port.
Baud Rate
The Baud rate controls how fast data is transmitted over the serial connection. The higher the speed, the more likely that errors can occur. The Baud rates you can choose include:
|
Baud Rates |
||||||
|
9600 |
|
115200* |
|
576000 |
|
1500000 |
|
19200 |
|
230400 |
|
921600 |
|
2000000 |
|
38400 |
|
460800 |
|
1000000 |
|
2500000 |
|
57600 |
|
500000 |
|
1152000 |
|
3000000 |
* Default
