MOTION MOUNT Compatibility

This section includes:

The DSMC® RED MOTION MOUNT® S35 Ti PL and DSMC RED MOTION MOUNT S35 Ti Canon® (Captive) enable you to mount most PL cinema lenses and Canon EF compatible lenses to your camera.

WARNING: Using lenses, adaptors, or other accessories that are not compatible with the MOTION MOUNT may damage the internal glass or other elements in the lens mount.

WARNING: Lenses, adaptors, and other PL-mount devices with mounting elements that protrude more than 27.73 mm behind the PL mounting flange are not compatible with the MOTION MOUNT.

NOTE: Any damage to the DSMC RED MOTION MOUNT S35 Ti PL or the camera system caused by using incompatible lenses (including non-standard PL lenses) or devices is not covered under warranty.

Compatibility Requirements

Some lenses are NOT compatible with the MOTION MOUNT due to the liquid crystal glass and shape of the baffle inside the mount.

Refer to the following diagram to determine if the maximum protrusion depth and maximum protrusion diameter of a particular lens is compatible with the MOTION MOUNT. If any of the protruding lens elements extend beyond these dimensions, the lens is NOT COMPATIBLE.

DO NOT use lenses that have mounting elements that exceed the following values:

  • Maximum Protrusion Depth: 27.73 mm
  • Maximum Protrusion Diameter at a Protrusion Depth of 14.20 mm: 54.00 mm
  • Maximum Protrusion Diameter at a Protrusion Depth of 27.73 mm: 22.00 mm

WARNING: Use of a lens that extends beyond these dimensions may damage the MOTION MOUNT.

MOTION MOUNT Safe Zone

Figure: MOTION MOUNT Safe Zone

Compatible PL Lenses and Devices

The DSMC RED MOTION MOUNT S35 Ti PL is compatible with the lenses and devices listed in the table below:

Compatible PL Lens/Device

Focal Length

Angénieux Optimo

17–80mm T2.2

24–290mm T2.8

28–76mm T2.6

28–340mm T3.2

1.4x Extender

2.0x Extender

ARRI®/Fujinon® Alura

18–80mm T2.6

30–80mm T2.8

45–250mm T2.8

ARRI/Zeiss® Master Prime

16mm T1.3

18mm T1.3

21mm T1.3

25mm T1.3

27mm T1.3

32mm T1.3

35mm T1.3

40mm T1.3

50mm T1.3

75mm T1.3

ARRI/Zeiss Standard Speed

10mm T2.1

50mm T2.1

ARRI/Zeiss Super Speed

18mm T1.3

25mm T1.3

35mm T1.3

50mm T1.3

85mm T1.3

ARRI/Zeiss Ultra Prime

14mm T1.9

20mm T1.9

40mm T1.9

Century

1.4x Extender

2.0x Extender

Cooke® 5i

18mm T1.4

25mm T1.4

32mm T1.4

50mm T1.4

75mm T1.4

Cooke S4 Prime

14mm T2.0

18mm T2.0

21mm T2.0

25mm T2.0

27mm T2.0

32mm T2.0

35mm T2.0

40mm T2.0

50mm T2.0

65mm T2.0

75mm T2.0

100mm T2.0

Fujinon Cabrio

19–90mm T2.9

Fujinon Premiere

14.5–45mm T2.0

24–180mm T2.6

75–400mm T2.8–3.8

Hawk V-Lite Anamorphic

45mm T2.2

65mm T2.2

RED® PRO PRIME

25mm T1.8

35mm T1.8

50mm T1.8

85mm T1.8

100mm T1.8

300mm T2.9

RED PRO ZOOM

17–50mm T2.9

18–85mm T2.9

RED ZOOM

18–50mm T3.0

50–150mm T3.0

Incompatible PL Lenses and Devices

The DSMC RED MOTION MOUNT S35 Ti PL is NOT COMPATIBLE with the lenses and devices listed in the table below:

Incompatible PL Lens/Device

Focal Length

Description

Angénieux Optimo DP Series

16–42mm T2.8

30–80mm T2.8

DP Series lenses have a flange depth that does not meet standard specification for PL lenses.

ARRI/Zeiss Standard Speed

12mm T2.1

16mm T2.1

20mm T2.1

24mm T2.1

32mm T2.1

40mm T2.1

The rear flange depth of these lenses are too wide or too long and interfere with the MOTION MOUNT.

Cooke S2/S3 Speed Panchro

32mm T2.3

The rear flange depth is too long and interferes with the MOTION MOUNT glass.

PL-to-B4 Adaptor

N/A

The rear face of the PL-to-B4 Adaptor interferes with the MOTION MOUNT glass.

RED FOCUS

N/A

The rear face of the RED FOCUS interferes with the MOTION MOUNT glass.

RED PRO PRIME

18mm T1.8

The extended PL cover ring interferes with the ridges on the baffle inside the DSMC RED MOTION MOUNT S35 Ti PL, preventing installation.

Compatible Canon EF Lenses

The DSMC RED MOTION MOUNT S35 Ti Canon (Captive) supports all lenses that are compatible with the DSMC® Canon Mount.

For more information and a full list of compatible lenses, see the camera operation guides.

Non-Linear Editing (NLE) Applications

The .R3D files captured using the MOTION MOUNT are compatible with the following applications:

  • REDCINE-X PRO Build 20.0.0 or later
  • Adobe Premiere® Pro CC or later
  • Avid® Media Composer
  • DaVinci® Resolve
  • EDIUS® Pro
  • Final Cut Pro® 7 or Final Cut Pro X

    NOTE: Final Cut Pro requires Apple® Workflow Installer.

  • Vegas™ Pro
RED MOTION MOUNT Operation Guide
955-0013, REV-AB
Copyright © 2019 RED.COM, LLC. All rights reserved.