Pro Battery Module (Quad)
Figure: Pro Battery Module (Quad) with REDVOLTs (Left) and REDVOLT XL (Right)
The Pro Battery Module (Quad) harnesses the power of four (4) REDVOLT batteries or two (2) REDVOLT XL batteries. Similar to the Pro Battery Module (Dual), this module enables hot swap support for continuous power to the camera without missing a shot. The module also offers 1/4-20 mounting points for configuration support.
For installation and removal instructions, go to EPIC/SCARLET Power Module Operations.
WARNING: DO NOT use more than one (1) battery module at a time. Using multiple battery modules may damage the camera and is not covered under warranty.
NOTE: A Module Adaptor or +1 Adaptor Module is required to mount the Pro Battery Module (Quad) to the EPIC/SCARLET BRAIN.
NOTE: The Pro Battery Module (Quad) does not charge batteries.
Pro Battery Module (Quad) LEDs
Each battery compartment has an LED and battery eject button to show the corresponding battery status.
|
Color/Flashing |
Description |
|---|---|
|
Off |
No battery |
|
Green |
Battery is charged, but is not in use |
|
Green flashing |
Battery in use |
|
Amber flashing |
Battery has 10 minutes of run time remaining; Accessing media (when formatting) |
|
Red |
Battery needs to be recharged |
|
Red flashing |
Battery has five (5) minutes of run time remaining |
Insert a Battery
- Align and insert the selected REDVOLT or REDVOLT XL battery.
- Apply pressure to the battery until a click is heard, signalling the battery is properly seated.
Remove a Battery
- Press the Eject button(s) to release a battery from the module.
- REDVOLT: Press the Eject button next to the desired battery.
- REDVOLT XL: Press both Eject buttons next to the battery.
- Remove the battery.