RED Lens Control Motor Cable (3.3KΩ 0Version)
The RED Lens Control Motor Cable (3.3KΩ Version) provides a 7-pin 1B to 7-pin 1B LEMO cable used to connect RED Lens Control Motors to compatible third-party motor drivers. This cable provides a 3.3k ohms (Ω) resistance identification to the motor driver. RED offers the following cables:
-
790-0439: RED Lens Motor Cable 18"
-
790-0438: RED Lens Motor Cable 24"
NOTE: The RED Lens Control Motor is also compatible with third-party systems using the appropriate RED motor cable with the proper internal identification resistor. For more information, go to RED Start/Stop Cable (1B to Sync, Ctrl, BNC), or visit the RED Store.
Figure: RED Lens Control Motor Cable (3.3KΩ Version)
|
# |
Connector |
Part Number |
|---|---|---|
|
1 |
J1 |
LEMO FHG.1B.307.CLAD62Z |
|
2 |
J2 |
LEMO FGG.1B.307.CLAD62Z |
RED Lens Control Motor Cable (3.3KΩ Version) Pinout
Figure: Front Face View J1 (Left)
|
red W.M.D. motor cable (focus, iris, zoom) |
|||
|---|---|---|---|
|
J1 |
J2 |
Signal |
Wire Color |
|
J1-1 |
J2-1 |
Motor (+) |
Red |
|
J1-2 |
J2-2 |
Motor (–) |
Black |
|
J1-3 |
J2-3 |
Encoder A |
Orange |
|
J1-4 |
J2-4 |
+5 VDC |
Brown |
|
J1-5 |
J2-5 |
GND |
Blue |
|
J1-6 |
J2-6 |
Encoder B |
Violet |
|
J1-7 |
J2-7 |
Motor ID with 3.3K in series |
Yellow |
|
J1-SHELL |
J2-SHELL |
GND (Shield) |
Braid Shield |