REDVOLT and REDVOLT XL

You are here:

REDVOLT and REDVOLT XL

Figure: REDVOLT XL (Left) and REDVOLT (Right)

REDVOLT and REDVOLT XL batteries are lightweight and rechargeable batteries designed to power the camera. REDVOLT batteries can be mounted to DSMC^® power modules for extended mobile power, or inserted into the DSMC Side Handle for short term power.

NOTE: REDVOLT XL batteries require a REDVOLT Charger (Quad), or REDVOLT XL Module to recharge.

NOTE: REDVOLT batteries require a REDVOLT Travel Charger, REDVOLT Charger (Quad), or DSMC2^® REDVOLT Expander to recharge.

NOTE: A DSMC2 REDVOLT XL Module is required to use a REDVOLT XL battery with DSMC2 cameras.

NOTE: A DSMC2 REDVOLT Expander is required to use a REDVOLT battery with DSMC2 cameras.

REDVOLT batteries are compatible with following DSMC power modules:

REDVOLT batteries should only be charged using the following approved RED chargers:

REDVOLT Performance

The following table provides information on REDVOLT battery run and charging times.

Battery	Nominal Energy	Run Time¹	Charge Time (80%)	Charge Time (Full)
REDVOLT	37 Wh	30 minutes	60 minutes	90 minutes
REDVOLT XL	89 Wh	90 minutes	80 minutes	120 minutes

Approximate battery run times based on recording in 4K FF resolution at 24 FPS.

REDVOLT LED Array

Figure: REDVOLT LED Array

The REDVOLT and REDVOLT XL battery LED arrays consist of three (3) LEDs and a status button. Press the status button to illuminate the LEDs, displaying the remaining battery charge level in 33.3% steps.

LED Pattern	Description
Three (3) LEDs are on	71% to 100% capacity remaining
Two (2) LEDs are on	41% to 70% capacity remaining
One (1) LED is on	11% to 40% capacity remaining
One (1) LED flashes for three (3) seconds	0% to 10% capacity remaining
The two (2) outside LEDs flash for three (3) seconds	Battery error¹

If you receive this battery error, submit a Support ticket at https://support.red.com.